How to Use Wood Grain Pvc Flooring Printed Film?- Hangzhou Linan Xingda Paper Co., Ltd.

Wood grain PVC flooring printed film is a type of decorative film that is applied to PVC flooring to give it a realistic wood grain appearance. Here are the steps to use wood grain PVC flooring printed film:

Prepare the surface: The surface of the PVC flooring must be clean, dry, and free of any debris or dust. If necessary, use a cleaning solution to remove any dirt or grime from the surface.

Cut the film to size: Measure the area of the PVC flooring that needs to be covered and cut the wood grain PVC flooring printed film to the appropriate size, leaving a little extra around the edges for trimming.

Apply adhesive: Apply adhesive to the back of the PVC flooring printed film using a brush or roller. Make sure to apply the adhesive evenly over the entire surface.

Apply the film: Carefully place the wood grain PVC flooring printed film onto the PVC flooring, starting at one end and working your way to the other end. Smooth out any wrinkles or bubbles as you go.

Trim the edges: Once the film is in place, use a utility knife or scissors to trim any excess film from the edges of the PVC flooring.

Apply a topcoat: For added durability and protection, apply a topcoat of sealant over the wood grain PVC flooring printed film. Allow the topcoat to dry completely before using the PVC flooring.

By following these steps, you can successfully use wood grain PVC flooring printed film to give your PVC flooring a realistic wood grain appearance.